Nissan Juke : Juke Forums banner

Engine error code P0107

1.3K views 3 replies 3 participants last post by  Macgyver  
#1 ·
Hi,

I have a Nissan Juke 1.6 Dig-T and get an error P0107.

Image


If I clear the error code and immediately start the engine the error dosn't come back.
When I stop the engine and start again between 5 sec --> Sam the error don't come back.
If I stop and start the engine ca 10 sec or later after when the engine start the error come back.
Image


- I replaced both sensor - step by step -- ( see the picture in a red circle ) but dosn't help.
Image


Can you advise what to check for that failure ?

Thank you
Szakos2094
 
#2 ·
MAP sensor is the lower one that circled in red. But before just throwing a part at it, get it properly diagnosed. And if you are just going to throw a part at it, please for the love of god either get an OEM one or a real hitachi MAP sensor. The cheap aftermarket ones are horrible.
 
#4 ·
PO107 is not in the North American shop manual.

I suggest you download the European FSM and see what you can find out what it says to do to diagnose it. Just dont throw parts at it. Otherwise take it to a shop and have them diagnose it.