Nissan Juke : Juke Forums banner

Engine error code P0107

1.3K views 3 replies 3 participants last post by  Macgyver  
#1 ·
Hi,

I have a Nissan Juke 1.6 Dig-T and get an error P0107.

Image


If I clear the error code and immediately start the engine the error dosn't come back.
When I stop the engine and start again between 5 sec --> Sam the error don't come back.
If I stop and start the engine ca 10 sec or later after when the engine start the error come back.
Image


- I replaced both sensor - step by step -- ( see the picture in a red circle ) but dosn't help.
Image


Can you advise what to check for that failure ?

Thank you
Szakos2094
 
Discussion starter · #3 · (Edited)
MAP sensor is the lower one that circled in red. But before just throwing a part at it, get it properly diagnosed. And if you are just going to throw a part at it, please for the love of god either get an OEM one or a real hitachi MAP sensor. The cheap aftermarket ones are horrible.
I ordered 1st a cheap one just for localize the error. When the error gone I want to order a better quality.
Just for the test I don't want to oreder an expensive one.
The replacemet for the cheap one generate the same error with the original Nissan sensor.
This case I ask more advice for what to check.