I just got done installing a set of 07+ Nissan Versa Manual pedals in my Juke. The fitment of the pedals is great. The only thing I am returning is the dead pedal. The shape is not exactly for the Juke. I asked them if I could exchange it for a 07+ Altima which I think will fit much better. The pedals only cost $89.13 with shipping and the quality is awesome. They are about a 1/4" thick (maybe a little more) and come in a variety of finishes and styles I chose smooth satin. SRP Racing - Custom Aluminum Racing Pedals
1. Remove the stock rubber pads
2. Cover the pedals in masking tape mark the holes you plan to drill.
3. Use a center punch to help with drilling.
4. Drill the all three pedals using a 1/8" bit
5. Redrill the clutch and brake pedals using a 3/16" bit (the 1/8" was just a starter hole).
6. Remove the tape and install you pedals. The clutch and brake use nuts and bolts the gas pedal uses self tapping screws.
Total time 30 minutes.
The feel of the pedals are fantastic much more grip with the clutch and brake. The gas has a good amount of grip but is smooth so your foot can slide across it.
1. Remove the stock rubber pads
2. Cover the pedals in masking tape mark the holes you plan to drill.
3. Use a center punch to help with drilling.
4. Drill the all three pedals using a 1/8" bit
5. Redrill the clutch and brake pedals using a 3/16" bit (the 1/8" was just a starter hole).
6. Remove the tape and install you pedals. The clutch and brake use nuts and bolts the gas pedal uses self tapping screws.
Total time 30 minutes.
The feel of the pedals are fantastic much more grip with the clutch and brake. The gas has a good amount of grip but is smooth so your foot can slide across it.