[S1Haybarny]

Had this issue after queuing for petrol and the stop/start and lights drained the battery right down. Tested battery and alternator all fine in my 67 plate 1.6 DIG Seems to me that once the light starts flashing it's impossible to turn off even with a replacement battery or your battery being OK. I solved this issue by buying a OB2 scanner/ Creader on ebay for £15. No DTC error codes found on scan but reset the ECU and cleared the codes anyway and light now off and stop start working again. Cheaper than taking it to Nissan just to reset at £80 an hour for a diagnostic. Handy little tool to have

Had this issue after queuing for petrol and the stop/start and lights drained the battery right down. Tested battery and alternator all fine in my 67 plate 1.6 DIG Seems to me that once the light starts flashing it's impossible to turn off even with a replacement battery or your battery being OK. I solved this issue by buying a OB2 scanner/ Creader on ebay for £15. No DTC error codes found on scan but reset the ECU and cleared the codes anyway and light now off and stop start working again. Cheaper than taking it to Nissan just to reset at £80 an hour for a diagnostic. Handy little tool to have

I know this thread was a while ago but you are my absolute saviour!! I was going insane, new battery etc and the flipping light still flashing! Nissan wanted £168 to plug it in so bought the OBD2 reader £14.79 Amazon, ran diagnosis and no errors so hit reset and boom no flashing light!! Thank you so much!!!!!! Now I pray it stays off 🙏🏻🙏🏻

 

[S1Haybarny]

What app you have to run diagnostics?
Thank you

‘mucar OBD2 Scanner Universal OBD II code reader, CDL20 OBD2/EOBD Car Fault Diagnostic Tool with Full OBD2 Functions,Code Scanner for OBDII Protocol Vehicles’

Purchased above device from Amazon under £14, plugged it in and ran diagnostics on the device and it re-set it, no app required