[RevUp]

7) OE Pedal Covers for manual, these are a European/Japan OEM accessories. Normal wear
$80

8)Rear Fog light for Nismo, Smoked light for rear bumper
$50

9)4-H tech short throw shifter Will not work for RS transmission (NEW never installed)
$100

10) 7 Piece red interior set. This is the center console ,all 4 door switch and the lower portion for the front door panels SOLD

11) Whispbars Roof rail set, these are aluminum with t-slots. Comes with brackets for the juke
$200

 

[RevUp]

12) BRAND NEW
Clutch master FX350 clutch kit and single piece Flywheel
SOLD



13) Brand New never installed Wavetrac LSD for 6 speed. I have 3 quarts of OE nissan fluid I will throw in.
SOLD

 

[13r1an]

first of all.... BRO. WTF. WHY. I understand why you're leaving but still. Lame.

second of all. BRO. WTF. I COULDA USED THAT CLUTCH/FLYWHEEL/LSD 2 MONTHS AGO. I would have absolutely 100% installed that but now I am never ever ever ever going to drop my transmission again on this car.

Third... Just for the others reading this considering parts:
The 4H short shifter is worth its weight in gold, that thing is dope. The install sucks (I did a howto that's on YT) but it's worth the effort.
The injen front strut bar is the one that can clear a cold air intake. The only one, to clarify.

Not that I've seen you for like 3 or 4 years but still.... gonna miss ya. Just like I have for the last 3 or 4 years...

 

[Jersey Juke RS]

Check messages!

 

[RevUp]

first of all.... BRO. WTF. WHY. I understand why you're leaving but still. Lame.

second of all. BRO. WTF. I COULDA USED THAT CLUTCH/FLYWHEEL/LSD 2 MONTHS AGO. I would have absolutely 100% installed that but now I am never ever ever ever going to drop my transmission again on this car.

Third... Just for the others reading this considering parts:
The 4H short shifter is worth its weight in gold, that thing is dope. The install sucks (I did a howto that's on YT) but it's worth the effort.
The injen front strut bar is the one that can clear a cold air intake. The only one, to clarify.

Not that I've seen you for like 3 or 4 years but still.... gonna miss ya. Just like I have for the last 3 or 4 years...

Yeah I've been contemplating the past year on selling or keeping, I've lost interest and have moved on to other car projects. Sucks I never got to enjoy the juke to its full potential but its time to bite the bullet and part her out.

 

[slcjuke]

Im wayyyy too lazy to part mine out and will def just list as-is when i wanna sell it............ which might come soon lol

 

[RevUp]

14) JDM Carbon Fiber Lip, (fits nismo fascia only) has small rock chip to the clear coat but not noticeable on the car unless you look for it.
SOLD

 

[RevUp]

15) Selling BBK as a set will not separate anything. Everything has approximately 10k miles

Akebono caliper set from 370Z, these were bought new then powder coated purple.​

Z1 2 piece rotors, sprinkle slotted. These bolt right up to the juke no brackets or shim crap needed to bolt the 370z calipers. Plus they are 10 lbs less weight than standard rotor per side.​

Also rear rotors that bolt up and OEM nissan brake pads. REQUIRE 18" wheels to clear calipers.​

$1000​

​

SOLD​

​

 

[RevUp]

16) Mishimoto Oil Filter Sandwich Plate Adapter, Bolts right to juke, allows you to add oil pressure gauge and/or oil cooler.
$40

17) Injen downpipe 2nd cat. for FWD and 11-17
$190

 

[RevUp]

18) Ok this last one is a trade for your wheels(not need to be decent shape and tires be ok) plus CASH, So this is local only, or I'll meet you half way if your 1 hour drive for me, I'm in Tarpon Springs Florida

Nismo/Rays Engineering super lightweight forged wheels.18x9J (front) and 19x10J inch (rear)
These are from the Final Nismo 350Z from 2008. Very rare wheels. Minor curb marks.
Tires are Cooper Zeon RS3-S Front 245/45/18 Rear 265/35/19 approximately 13k miles I'll update with tire tread gauge reading.
$1200

SOLD

 

[13r1an]

what a beautiful car with beautiful mods. </3

 

[Aero31477]

Selling the car and selling upgrades from 14 Nismo. Some are NEW never installed and others have normal wear see pictures.
All parts came off a 2014 Juke Nismo 6-speed 2wd

Located in Tampa bay area to meet local or
DM your mailing zip code and I'll figure out shipping.

1) 2j Intercooler with pipes. This is a early version they sold. You don't have to change your front crash bar with this (your factory works) or cutting lower grille from the bumper. This comes with two pipes that lead to the upper charge pipes.(This pipe kit works with injen hard pipes) Also comes with brackets to mount the intercooler to crash bar.
$400
View attachment 191141

View attachment 191142 View attachment 191143
View attachment 191203
2) Injen hard pipe set, They are painted with a custom red metallic paint. The stud where the boost control mounts have been shaved off.
$220
View attachment 191144
View attachment 191145 View attachment 191204

3) Injen intake SRI. This is painted black with original filter attached
$110
View attachment 191146

4) Injen Front strut tower brace, Lightweight aluminum
$120
View attachment 191147

5) Rear Sway bar Ultra Racing, Could use some paint, See damage on passenger corner, still mounts fine.
SOLD

6) Lights/Wiper stalk from Infiniti , chrome tips and allows control Nismo DRL independently and also has rear wiper control delete. (I Have a wiper arm delete plug I'll throw in with it from Alloy-carbon)
$40
View attachment 191149

Hey how can I pay u for the short shifter let’s me now thanks I have 2014 nismo 6 speed Juke

 

[Jaxxa]

15) Selling BBK as a set will not separate anything. Everything has approximately 10k miles

Akebono caliper set from 370Z, these were bought new then powder coated purple.​

Z1 2 piece rotors, sprinkle slotted. These bolt right up to the juke no brackets or shim crap needed to bolt the 370z calipers. Plus they are 10 lbs less weight than standard rotor per side.​

Also rear rotors that bolt up and OEM nissan brake pads. REQUIRE 18" wheels to clear calipers.​

$1000​

I have got to figure out if my setup can fit a BBK, they are 17s but also like a -25 offset, so there is the tiniest chance that they might actually clear the barrel of the wheel, but short of finding someone who already has a BBK installed and dismounting this massive tire off the rim to test fit, idk how I can figure that out.

 

[RevUp]

Hey how can I pay u for the short shifter let’s me now thanks I have 2014 nismo 6 speed Juke

DM Sent

 

[RevUp]

I have got to figure out if my setup can fit a BBK, they are 17s but also like a -25 offset, so there is the tiniest chance that they might actually clear the barrel of the wheel, but short of finding someone who already has a BBK installed and dismounting this massive tire off the rim to test fit, idk how I can figure that out.

View attachment 191213

I had 18" up front and single wheel weight height was to much and making contact with the caliper when I first installed. SO 17" will work anyway around it unfortunately

 

[turbo noob]

I have got to figure out if my setup can fit a BBK, they are 17s but also like a -25 offset, so there is the tiniest chance that they might actually clear the barrel of the wheel, but short of finding someone who already has a BBK installed and dismounting this massive tire off the rim to test fit, idk how I can figure that out.

View attachment 191213

I got a few options you can play with if you want to schedule a trip to Clermont FL

 

[Jaxxa]

I had 18" up front and single wheel weight height was to much and making contact with the caliper when I first installed. SO 17" will work anyway around it unfortunately

Yeah I can tell from the pictures how tight everything is, lol. it's brutal

I got a few options you can play with if you want to schedule a trip to Clermont FL

I will definitely keep you in mind if I get more serious about brakes

 

[Ccook42]

I'm just going to say it - I'd love to see modded cars come up for sale on the Classifieds section before being posted elsewhere or parted out. I know most people are likely not coming to the forum to buy a car, and you likely get more value back from parting the car out, but I think it would still be a neat way to immortalize people's builds before it goes away in some form or fashion. Maybe a separate thread for pre- part out pictures in the Nissan Media section?

I love the wheels and akebonos! Cool look. The purple worked with the sapphire black really well.

 

[Zuke Duke]

Interested in the brakes, im up in Leesburg. AKA Sleezeburg. I have 18" (35 Inset) and 2J Spacers so It will probably work.