Nissan Juke : Juke Forums banner

21 - 26 of 26 Posts

·
Registered
2011 SL AWD. Gently modified.
Joined
·
24 Posts
Discussion Starter #21
Here are pics of the turbo oil feed line:
Bent the DP heatshield for the fitting
189227

around behind the turbo
189228

enter turbo feed at ~130 position
189229


I used a block of wood to hold the fitting at the right position while tightening. Then the shield was reset with 3 of 4 screws.

This is a tedious project. Have patience.
 

·
Super Moderator
Joined
·
10,961 Posts
21 - 26 of 26 Posts
Top