[Ex-Spencive]

Hi gang got a 2017 juke nismo rs 2017
I’ve got injen intercooler and charge pipes and they keep blowing off. Long story short I’m getting it straight piped instead of silicone hoses. Anyways took the charge pipe off and it was on there pretty good so took a bit of persuasion. When it came off I can’t be 100% positive but I think something has gone down into the turbo. How do I get this out? I was going to use an extended magnet is there anything I can do to flush it out. As the turbo isn’t Exactly located in the easiest spot to get to
It.

many thanks

 

[Macgyver]

There needs to be rolled edges on the pipes for them to stay on. The clamps need to be tight. Make sure the pipes you used have rolled edges. (The intake doesnt matter)

There is nothing wrong with silicone hoses.

To be honest. If its past the turbine blades. You gotta take the turbo off to get it out. BUT it wont get past the IC so you could start it up. Dont quote me on this tho. Good way to fry the engine.

 

[Ex-Spencive]

There needs to be rolled edges on the pipes for them to stay on. The clamps need to be tight. Make sure the pipes you used have rolled edges. (The intake doesnt matter)

There is nothing wrong with silicone hoses.

To be honest. If its past the turbine blades. You gotta take the turbo off to get it out. BUT it wont get past the IC so you could start it up. Dont quote me on this tho. Good way to fry the engine.

Yeah mate all edges are rolled I’ve got those reallly thick clamps about inch thick it just pops off all the time proper awkward position! I’ve bought a long tip magnet and some of those drain in lockers hopefully I can get it that way but. If not I need to get the turbo off ?

 

[Macgyver]

Well. What exactly fell in ?

If its small enough there mite be ways to get it out.

 

[Ex-Spencive]

Well. What exactly fell in ?

If its small enough there mite be ways to get it out.

Sorry for the late reply. I manage to get it out I took the charge pipe on and turned the car on and it flew out

 

[Macgyver]

Yeah I was gonna say disconnect intake and output and hook up a leaf blower to it.